AA 2016-2020 RZR Turbo & 2018-Up RS1 Primary Clutch Fan Blade by Aftermarket Assassins
SKU: 91759291938

AA 2016-2020 RZR Turbo & 2018-Up RS1 Primary Clutch Fan Blade by Aftermarket Assassins

Sale price$80.99 Regular price$89.99
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

AA 2016-2020 RZR Turbo & 2018-Up RS1 Primary Clutch Fan Blade by Aftermarket AssassinsThis primary clutch fan blade is a must have for anyone with the turbo RS1 clutches! The primary clutch has fins on the back side to aid in airflow, but is lacking airflow on the spring side of the clutch. With this fan blade we scoop air and force nearly 50 CFM more air through the clutch ducting over stock above 8200 RPM. This results in a cooler running CVT system and less blown belts. Fits all year 2016 2020 RZR Turbo, Turbo S, & RS1 models Does

  • This primary clutch fan blade is a must have for anyone with the turbo/RS1 clutches!  The primary clutch has fins on the back side to aid in airflow, but is lacking airflow on the spring side of the clutch.  With this fan blade we scoop air and force nearly 50 CFM more air through the clutch ducting over stock above 8200 RPM.  This results in a cooler running CVT system and less blown belts.  
  • Fits all year 2016-2020 RZR Turbo, Turbo S, & RS1 models
  • Does NOT fit 2020-2021 Pro XP or 2021 RZR Turbo or Turbo S models
  • On our meter in the factory clutch ducting, the stock CVT rated at  407 CFM @ 8200 RPM.  With the clutch fan blade we saw 457 CFM @ 8200 RPM
  • Airflow is better at idle to wide open throttle and ramps up the higher the engine speed
  • Installs easily with the supplied longer bolts right over the factory spring plate
  • Adds support to the clutch towers for rigidity helping clutch life and performance
  • Weighs in at only .4lbs, so extremely lightweight
  • Made from anodized aluminum
  • Keep in mind if you are thinking of going with a CVT blower that they actually restrict airflow at higher RPM's where you need it most.  Our clutch fan blade will perform better than any CVT blower from 5000 RPM and up where you need it most.
  • In rare occasions clearance your plastic clutch cover may be needed if the cover is slightly warped.  This would be an extremely small amount and would not effect looks or performance of the clutch cover.  Simply use sand paper or a die grinder if you see the fan blade rubbing (It would actually be the bolts rubbing).  
  • Fits all 2016-2019 RZR XPT, Turbo S, and RS1 Models

Shipping only $7.99 with in the lower 48 states

SS

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 91759291938

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 1582 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
V
Verified Purchase
Virginia H.
Bozeman, US
★★★★★ 1
Worst Experience of my Life
My Epson printer had problems with it's software in early mid April, while trying to resolve the software glitch which I could not, I found that every picture I had scanned for some time had lines running through it and no cleaning process or other process that Epson had would get rid of it, and everything I had scanned for my project, was ruined. I sent the machine to Asurion following their instructions and explaining the issues. They sent it back to me after a month saying they had double checked and fixed everything, I spent some time setting it all back up, only to find that exactly the same two issues were still present and the machine was unusable. I sent in a second request, this time they sent it back to me a month later saying they couldn't find anything wrong with it. Hooked it up again, same problem. I complained numerous times asked for them to warranty the item; they would not unless I sent it back to them and they kept it and then they would give me a credit on my amazon account to buy a new one. I packed it up and drove to UPS a third time and mailed it back to them, after about three weeks they sent me a note that they had it and that they were sending it back to me as they couldn't find anything wrong. Three times I ha filled out their entire sheet with product, date of purchase, problems detailed, receipts, picture of the lines in the photos that it was making over all the scanned photos. Then after two weeks of back and forth they sent me a message telling me they couldn't warranty it until I filled all this information out again on line. Then they told me they couldn't read the tiny print off the receipt printed off the Amazon site, which I cannot change. I then blew up the receipts and circled everything and sent it back to them again...of course they already had now five copies of this same information, they had paid for postage three times to NY and back to fix it and they still aren't able to process a payment to me????? Finally I get a call from a gentleman telling me that I will have a credit to my Amazon Card in 72 hours. Great. Then he calls me back the next day and says the warranty team has decided they would not warranty the item and credit me but they will mail me a check in 7 to 10 days. After over four months of this I received a check...will it bounce? I don't know yet. My project that I was working on was for my mother's Celebration of Life, I could not do what I wanted to do for her, this caused me emotional pain, as well as the obvious frustration of four months of aggravation and complete and total ineptitude on their part.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 10, 2024
S
Verified Purchase
Sharon H
Los Angeles, US
★★★★★ 5
Sublimation ink
Love this ink! Bright colors. Haven't had to refill my ink yet. No clogging problems. Ink quality is great!! Very easy to install.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
H
Verified Purchase
Hilen Cabello
Waukegan, US
★★★★★ 5
Very very good
Very good sublimation inks, the images come out with good colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
C
Verified Purchase
Christine
Lexington, US
★★★★★ 5
Vibrant, Rich Colors
This is my absolute FAVORITE sublimation ink. For the price, it's the best you'll find the canisters are easy to use, don't leak, and lasting for months. The bottles fit perfectly onto the eco tank. The colors are vibrant, rich, transferring to piece exactly as it should. These work like a dream and I'm a loyal customer, for sure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 15, 2025
D
Verified Purchase
david medina jr
Lowell, US
★★★★★ 5
Very vibrant.
Great quality!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026

recommand products